![background image](http://html1.mh-extra.com/html/barco/rhdm-1701/rhdm-1701_technical-specifications_3054233031.webp)
Document number: TS RHDM-1701 - K5960056
Issue: 00
Release date: 3 aug 2010
Technical specifications
Page 31 of 52
www.barco.com
Enter button
Select button (left mouse button)
Menu button– opens OSD menu
Option button (right mouse button)
8.1.5.2.3
USB port
A USB storage device with the latest firmware will immediately be recognized
and the display unit will initiate a firmware upload automatically. It is also
possible to connect a mouse as a replacement of the trackball and the
(left button) and
(right button) buttons.
8.1.5.2.4
Press buttons
The press buttons have a “short press” and a “long press” functionality. In
this manual the action of a short or long press is indicated by the following
icons:
Short press
Instantaneous effect
Long press (press longer
than 2 seconds)
Open a toolbox with advanced settings
When the buttons are pressed shortly, the function is immediately applied to
the image.
Most of the buttons have an advanced function when the button is pressed for
a long time (longer than 2 seconds). In the latter case, a
toolbox
appears on
the left hand side of the screen.
Some buttons on the numeric keypad can be used as a
function key
.
8.1.5.2.5
Press and rotary knobs
The rotary knobs are used for easy adjustments of basic settings.
Turning the rotary knob:
•
Image adjustment bar not visible: image adjustment bar is shown
•
Image adjustment bar visible: value that corresponds to the rotary knob
is changed
9
Turning clockwise = increasing value
9
Turning counterclockwise = decreasing value
Pressing the rotary knob:
•
Image adjustment bar not visible: image adjustment bar is shown
•
Image adjustment bar visible: value that corresponds to the rotary knob
is set to its default and calibrated value.
8.1.5.2.6
Trackball
The trackball allows the operator to move the pointer or navigate in the
menus.
Summary of Contents for RHDM-1701
Page 2: ......