Source Connections
6-2
5976002 RETROGRAPHICS 808s 100299
Highlight Port 2 : Video and press
ENTER
to toggle between VIDEO
or S-VIDEO.
Press
EXIT
to return.
Press
ADJUST
to return to operational mode.
Select with or
then <ENTER>
<EXIT> to return.
ADJUSTMENT MODE
Select a path from below :
GUIDED
RANDOM ACCESS
INSTALLATION
SERVICE
IRIS
Source 02
Select with or
then <ENTER>
<EXIT> to return.
Choose a setup pattern
from below :
SELECTED SOURCE
GENLOCKED PATTERN
INTERNAL # PATTERN
Source 02
Select with or
then <ENTER>
<EXIT> to return.
RANDOM ACCESS
ADJUSTMENT MODE
PICTURE TUNING
GEOMETRY
CONVERGENCE
FOCUSING
COLOR SELECT
ORBITING
CONTR. MODULATION
SOFT EDGE
Select with or
<ENTER> to accept
<EXIT> to return.
PICTURE TUNING
COLOR BALANCE
SYNC : FAST
PORT2 : S-VIDEO
LINE DOUBLER : ON
Highlight 'Picture Tuning' and press
ENTER
.
Select 'Selected source' and press
ENTER
.
Input selection
with the RCU or the local keyboard : press digit button 2
Depending on the priority setting in the 'Picture Tuning
menu', Video or S-Video can be displayed.
If the setting is not correct, start up the adjustment mode by
pushing on the
ADJUST
key.
Select 'Random Access' and press
ENTER
.
* Note: When using the Port 2 loop-through output, set the Termina-
tion Switch in the "OFF" position.
Connecting a S-Video or Video source to port 2.
Separate Y-luma/C-chroma signals for higher quality playback
of Super VHS signals.
56,1 56287,5 5(027(
/
5
5 /
PORT 4/5
PORT 3
COMM. PORT
PORT 1
PROJECTOR MODE
POWER / MAINS
Pin configuration input plug :
For S-Video :
pin 1 : earth (ground) luminance
pin 2 : earth (ground) chrominance
pin 3 : luminance (Y) signal 1Vpp ±3 dB
pin 4 : chrominance (C) signal 300 mVpp ± 3 dB
For Video :
pin 1 : earth (ground) video
pin 2 : nc
pin 3 : video signal
pin 4 : nc
