Source Connections
6-1
5976002 RETROGRAPHICS 808s 100299
6
SOURCE CONNECTIONS
Signal Input Connection to the Projector :
- Composite Video
- S-Video
- RGBS or RGsB
- RGB3S or RG3sB (option)
Only available when the optional Tri-level sync module is installed.
Port No
Projector input
Press Digit Button
1
Comp. Video²
1
2
S-Video
1
/Comp. Video* 2
3
RGB
2
3
4/5
RGB
2
4 or 5
4/5
Component video
3
6
4/5
RGB with Tri level sync
4
7
4/5
Component video
with Tri-level sync
5
8
56,1 56287,5 5(027(
/
5
5 /
1
2
4
3
5
PORT 4/5
PORT 3
COMM. PORT
PORT 1
PROJECTOR MODE
POWER / MAINS
Connecting a Composite Video source to port 1.
Video input selection :
with the RCU or the build in RCU : press digit button 1
* Note : if using the loop-through Video output, then set the
Termination Switch to the "OFF" position.
Composite video signals from a VCR, OFF air signal decoder,
etc..
56,1 56287,5 5(027(
/
5
5 /
PORT 4/5
PORT 3
COMM. PORT
PORT 1
PROJECTOR MODE
POWER / MAINS
footnotes
1
Input signal Y/C (luma/chroma)
2
Input signal : R, G and B with automatic sync
detection between seperate sync (separate com-
posite sync or with separate Hor and Vert. sync)
or sync on green (composite sync).
3
Input signal : R-Y, Y and B-Y with separate
composite sync or with separate Hor and Vert.
sync or with composite sync on Y.
4
Input signal : R, G and B with separate Tri level
sync or with Tri-level sync on green.
5
Input signal : R-Y, Y and B-Y with separate Tri
level sync or with composite Tri-level sync.
*
Video or S-Video : switchable in the Picture
Tuning menu.
