10-5
Service Mode
5975958A RETRO GRAPHICS 2100LC 240898
Select with
ê
or
é
then <ENTER>
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUN TIME
LAMP RUN TIME HISTORY
DIMMING
MORE ...
Reset Lamp Run Time
Reset lamp run time is only allowed when a new lamp is installed.
Highlight Reset Lamp Run Time by pressing the control disc for-
wards or backwards and press
ENTER
to select.
When Reset Lamp Run Time is selected in the Service Mode
selection menu, the following warning will be displayed :
Risk of electrical shock. Reset lamp run time is reserved to qualified
service personnel.
If you are not qualified, press
EXIT
to cancel the reset operation.
WARNING
-----------------------------------------------------
RISK OF
ELECTRICAL SHOCK
______________________________________________________________
LAMP RESET RUN TIME
is reserved to
qualified
service personnel
<ENTER> to accept
<EXIT> to return.
Lamp Run Time History
To get an overview of the different lamp run times, highlight Lamp
Run Time History by pressing the control disc forwards or back-
wards and press
ENTER
.
ENTER
displays the Lamp Run Time History menu.
EXIT
returns to the adjustment selection menu.
A listing with the lamp serial number and the corresponding run
count will be displayed.
The actual installed lamp will be marked.
Press
EXIT
to return to the service mode selection menu.
SERVICE
IDENTIFICATION
CHANGE PASSWORD CHANGE
LANGUAGE
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUN TIME
LAMP RUN TIME HISTORY
DIMMING
MORE ...
LAMP RUN TIME HISTORY
Serial No
Run count
-----------------------------------------------------
>
0111121
600
0110031
750
0110010
745
-----------------------------------------------------
<EXIT> to return
Select with
ê
or
é
Dimming
(for lamps with order numbers R9829510 and R9829740)
Highlight 'Dimming' by pushing the control disk up or down in the
Service menu and press
ENTER
to select.
The projector starts always with full lamp power but it can be reduced
to 50% of its maximum power in 8 steps.
Push the control disk to the left or to the right to reduce or increase
the lamp power. Press EXIT when the desired lamp power is installed.
The Service menu returns on the screen.
Due to start up conditions of the lamp (always full power), the Dimming
setting is not saved when the projector is powered down.
DIMMING
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTIME HISTORY
DIMMING
DIM
MORE...
Select with
ê
or
é
then <ENTER>