3. DVI input (re)placement
3.2
Replacing the DVI input
Necessary tools
•
Torx n°10
•
hexagonal nut driver
How to remove the DVI input board ?
1. Remove the front plates.
2. Loosen the input front screws and remove the plate.
Image 3-30
3. Remove the server.
4. Remove the side screw on the PMP side and on the lens side.
5. Disconnect the board by sliding it gently to the right and holding it slightly tilted (the right side downwards).
Image 3-31
6. Remove the board from the input frame
Mount the (new) DVI board
1. Insert the (new) board into the empty slot and place it slightly tilted downwards at the right side.
Note:
Positioning the board horizontally will not be possible at this moment.
2. Bring the connectors on the board in front of the connectors on the PMP and tighten the side screw on the PMP.
18
R5976887 DVI INPUT KIT FOR ICON 29/03/2006
Summary of Contents for R9843030
