1. Safety
1. SAFETY
1.1 Safety Guidelines
This procedure is intended for use only by qualified service technicians who have been trained and authorized
by BARCO !
W
ARNING
:
Hot Surface and Risk of Explosion:Switch the projector to stand by and let it cool down for at least
15 minutes . These lamps consist of a quartz arc tube operating at very high temperature and high pressure
(200 bar) which may explode suddenly. There is a risk of personal injury and property damage from hot quartz
arc tube particles if handled incorrectly.
W
ARNING
:
Risk of Electrical Shock: Power down the projector and unplug the power cord from the wall
outlet. Once the projector is cooled down and the power is off, continue with the procedure.
W
ARNING
:
Lamp Runtime Warning: Do not exceed the indicated maximum total lifetime of the lamp for safe
operation in normal power mode. Do not use it longer ! Always replace the lamp with the BARCO lamp kit.
R5976375 LAMP KIT FOR IQ/SIM4 PROJECTORS 23/06/2004
1
