![background image](http://html1.mh-extra.com/html/barco/r9841020-cine-versum-master/r9841020-cine-versum-master_installation-manual_4236570093.webp)
14. Switching linked displays To and Out Standby
14. SWITCHING LINKED DISPLAYS TO AND OUT
STANDBY
Overview
•
Switching by means of the Cine VERSUM Master
•
Direct Switching of the Linked Display
14.1 Switching by means of the Cine VERSUM Master
Overview
•
Switching In/Out Standby using the Jog Dial
•
Switching In/Out Standby using the Remote Control
14.1.1 Switching In/Out Standby using the Jog Dial
How to switch one or more displays To or Out standby mode
1. From the startup menu on the graphical display, press the jog dial to enter the main menu. (menu 14-1)
2. Scroll through the menu items until item INSTALLATION is pointed (menu 14-1).
3. Press the jog dial to confirm.
The INSTALLATION menu will open showing the available installation items. (menu 14-2)
4. Scroll through the menu items until item DISPLAY LIST is pointed (menu 14-2).
5. Press the jog dial to confirm.
The Display list menu opens showing the status of the linked displays, ON (operation), Standby or No display found (Display not
powered up).
The name of the linked displays in the display list menu below are numbered 1, 2 up to 6 as example. Notice that each display
in the chain can be renamed. (menu 14-3)
6. Select the display , whose status you want to change, by rotating the jog dial, e.g. Display 2 with status ON (menu 14-3).
7. Press the jog dial to confirm.
The Display settings menu opens showing the display setting items for that specific display. (menu 14-4)
8. Scroll through the menu items until item SWITCH OFF is pointed (menu 14-4).
9. Press the jog dial to confirm.
The selected display switches to the standby mode preceded by a message. Finally, the status of the Display 2 will change to
’Standby’. (menu 14-5)
CineVERSUM
Image Settings
Advanced settings
>Installation
Service
1 NO MODULE
2 NO MODULE
3 VIDEO [VIDEO]
4 NO MODULE
5 NO MODULE
6 NO MODULE
7 RGB-YUV [RGB]
8 NO MODULE
Shutdown
7 xga75_gs.c03 Back
Menu 14-1
Install
Input slots
File Service
>Display List
Internal Pattern
When no signal
Source Transition
OSD Configuration
Language
Keystone
Global Keystone:Yes
Default Input Balance
7 xga75_gs.c03 Back
Menu 14-2
Display List >2 CV50
1 On
3 CV50
2 Stdby
4 CV80
1 On
5 CV120
1 Stdby
6 CV80
2 On
7 xga75_gs.c03 Back
Menu 14-3
Display Settings
>Switch OFF
Display Info
Rename
IR Address
Update Soft
CW Index
Orientation
Proj_mode
7 xga75_gs.c03 Back
Menu 14-4
R5976468 CINE VERSUM SYSTEM 03112003
89
Summary of Contents for R9841020 Cine VERSUM Master
