![background image](http://html1.mh-extra.com/html/barco/r9841020-cine-versum-master/r9841020-cine-versum-master_installation-manual_4236570125.webp)
17. Adjusting the Picture
7. Adjust the respective Gain levels, by rotating the jog dial on the Master or the
←
and
→
keys on the Remote Control, until the
desired Color Temperature has been reached.
8. Press
EXIT
on the Remote Control or select item
BACK
in the menus to return.
Color Temperature
*Display White
Computer__9300K
Video_____6500K
Film______5400K
Broadcast_3200K
Custom Balance
Back
Menu 17-25
Custom Balance
Gain Red
Gain Green
Gain Blue
Back
Menu 17-26
Image 17-14
How to adjust the Color Temperature for Cine VERSUM 80 and Cine VERSUM 120
1. Select the Color Temperature item, which match the best the input signal, by rotating the jog dial on the Master or the
↑
and
↓
keys on the Remote Control (Selecting the preset Color Temperature, page 119).
2. Press the jog dial on the Master or the key
ENTER
on the Remote Control to confirm.
3. Select item CUSTOM BALANCE by rotating the jog dial on the Master or the
↑
and
↓
keys on the Remote Control. (menu 17-27)
Note:
Item ’Display White: an image with maximum white will be displayed.
4. Press the jog dial on the Master or the key
ENTER
on the Remote Control to confirm.
Note:
The measured color coordinates and luminance of R, G, B and W are written into the projector. These were be find by
measuring with a colorimeter. Adjusting the white coordinate will not affect the full-on color intensity of a pixel that is R,
G or B. Via the Custom balance, the preset value of a color temperature can be modified.
A sub menu opens, requesting to set up the X-Y coordinates for white, inclusive display of the already stored values (image 17-12).
Overview of the white X-Y coordinates with respect to the preset color temperatures. (image 17-15)
5. Proceed to the X-Y adjustment, using the jog dial on the master:
- Select the coordinate to be modified by rotating the jog dial and press to confirm.
- A new sub menu opens allowing to adjust, by rotating the jog dial, the value of the selected coordinate.
- Press the jog dial to confirm resulting in return to the coordinated selection menu.
- Repeat the procedure from the beginning for the other coordinate.
- Leaving the system, via item
BACK
.
R5976468 CINE VERSUM SYSTEM 03112003
121
Summary of Contents for R9841020 Cine VERSUM Master
