POWER REQUIREMENTS
Power requirements for electrical equipment differ from area to area. Please ensure that your
apparatus meets the power requirements in your area.
SAFETY
If the Power cord of the Interface is equipped with a ANSI 73.11 PLUG,
Factory preset Power Voltage for this interface is 120 VAC 60mA 50/60Hz.
If the Power cord of the Interface is equipped with a CEE 7 PLUG,
Factory preset Power Voltage for this interface is 230 VAC 40mA 50/60Hz.
If in doubt, consult a
QUALIFIED TECHNICIAN for voltage conversion.
POWER ADAPTATION
To adapt the power voltage of the
interface, please proceed as follows :
Warning: unplug the power cord be-
fore proceeding with the power volt-
age adaptation of the interface.
1. Remove the top cover to access the
interface module.
-remove the screw caps
-remove the screws
-separate bottom from top cover
WARNING
TO PREVENT FIRE OR ELEC-
TRICAL SHOCK, DO NOT
EXPOSE THIS
INTERFACE TO RAIN OR
MOISTURE
274.DRW
screw caps
2
