Barco R9050100, User Manual

Page: 94 / 233

9. Image menu
Image 9-79
Image 9-80
Image 9-81
Image 9-82
9.6 Image fi les services
Overview
• Files and fi le manipulations
• Manual Load fi le
• Delete fi le
• Delete all custom fi les
• Rename a fi le
• Copy a fi le
• File options
9.6.1 Files and fi le manipulations
Connecting a new source.
Before using a new source, a correct fi le has to be installed. The projector’s memory contains a list of fi les corresponding to the most
used sources. When the new source corresponds with one of these fi les, the fi le can be loaded and saved for future use. When
there is a little difference, the fi le can also be loaded and then edited until the source specs are reached.
VESA standards and video standards are pre-programmed.
Possible fi le Manipulations
The following fi le manipulations are possible :
• Load : installation of a fi le for a new source.
• Rename : renaming a fi le.
• Delete : deleting a fi le (only custom fi les)
• Delete all : delete all custom fi les
• Options : way of loading a fi le when a source is selected.
A loaded fi le can be edited via the Timings menu. Once a fi le is edited, it will be saved with the same name as the original fi le,
followed by a sequence number between rounded brackets.
90 R59770021 CLM R10+ 15/03/2010