Barco R9050100, User Manual

Page: 43 / 233

5. Connections
100
Light
output %
90
70
100
110 140
Input
voltage V
max. 3 lamps on
4 lamps on
170
264
Image 5-3
5.2 Input source connections
General
The input and communication unit is equipped with two input slots, which accept any type of input designed for the CLM projector.
The modularity of the input modules makes the CLM projector very
fl exible regarding input source connectivity. Note that the slot
numbering is done from top to bottom. So, the uppermost slot is slot number “1”, the second is slot number “2”. All input modules
have two status LED’s. The green LED lights up if the input module is selected as the active input module. The yellow LED lights
up if the input module has detected valid input syncs.
1
2
Y
G
Image 5-4
C
AUTION
:
Always install a cover plate on an unused input slot. This to prevent dust intrusion into the pro-
jector.
Available input modules
Image 5-5
5 Cable input (Multi purpose) (
R9854430 ).
Image 5-6
HDSDI - SDI input (
R9854450 ).
Image 5-7
DVI input (
R9854460 ).
R59770021 CLM R10+ 15/03/2010 39