![background image](http://html1.mh-extra.com/html/barco/r9010100/r9010100_owners-manual_474306067.webp)
6. Adjustment Mode
Black level setting : brightness
White level setting : contrast
The same absolute black and white level for the three colors allows the same reference for Brightness and Contrast control of the
picture !
These two references also set the range in which the ADC will work for that particular source (this explains also why each input
balance setting is linked to a particular source and thus saved in the image
fi
le).
6.4.6.2
Adjusting the input balance
How can it be done ?
To balance the three color signals of a particular source there are conditions; in fact we must know the black and the white level of
the source i.e. :
1.
The source in question must be able to generate a white signal, ideally a 100% white (background) full screen pattern
2.
The source in question must be able to generate a black signal, ideally a 100% black (background) full screen pattern
A
B
Image 6-7
White balance : In the projector, we will set the contrast for each color until we get a 100% light output picture when projecting a
100% white image (image A)
Black balance : In the projector, we will set the brightness for each color until we get a 0% light output picture when projecting a
100% black image (image B).
The changeover from min to max is indicated by the apparition of bright spots also called “digital noise”
An alternative to a full screen White/black pattern is the standard gray scale pattern, the white bar will be used
for white balance and the black bar for black balance.
Image 6-8
Black balance
1. Push the cursor key
↑
or
↓
to highlight
Input balance
2. Press
ENTER
to select.
The
Input balance
menu will be displayed. (menu 6-38)
3. Push the cursor key
↑
or
↓
to highlight
Black balance
.
R5976690 XLM H25 25/05/2009
63
Summary of Contents for R9010100
