Service Mode
7 - 4 ___________________________________________________________________________ R5976101.02 BARCO CINE5 310102
SERVICE MODE
COMMON SETTINGS
I2C DIAGNOSTICS
or
<EXIT> to return
then <ENTER>
Select with
PROJECTOR SETUP
MEMORY MANAGEMENT
MEMORY MANAGEMENT
or
<EXIT> to return
then <ENTER>
Select with
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MID POS
R & B CONVERGENCE MID
Power up Mode
When switched on from the Power switch, the projector can start up in 'Operating mode' or 'Stand-by mode'.
Operating mode
: The projector starts up and displays the image.
Standby mode
: The projector starts up in Standby and waits until the Standby key or a digit key is pressed.
'
To change the powerup mode, select
Power up
using the arrow keys and
then press
ENTER
to toggle between
Operating
and
Standby
.
EXIT
returns to
SERVICE
menu.
Common Address
Common Address is an address that all projectors respond to. The toggling of
this control sets the address to 0 or 1.
Memory Management
Highlight
MEMORY MANAGEMENT
using the
arrow keys then press
ENTER
to display the
MEMORY MANAGEMENT
menu.
Within the memory management menu, the
following items can be executed :
- copy a block
- delete a block
- delete all blocks
- all settings to mid position
- R & B convergence to mid
or
<EXIT> to return
then <ENTER>
Select with
CHANGE PROJECTOR ADDRESS
POWERUP MODE :
COMMON ADDRESS : 0
PROJECTOR SET-UP
IDENTIFICATION
TOTAL RUN TIME
CHANGE PASSWORD
Standby
or
<EXIT> to return
then <ENTER>
Select with
PROJECTOR SET-UP
IDENTIFICATION
TOTAL RUN TIME
CHANGE PASSWORD
Standby
CHANGE PROJECTOR ADDRESS
POWERUP MODE :
COMMON ADDRESS : 0
