BARCO 22
Projection Systems
Top Cover and Lens Installation
(Continued)
Installing the
Lens
To install the lens, follow the next procedure or look into the owners manual :
1
2
3
4
5
6
1
1
2
2
2
2
Pivote the motor part (A) up.
Put the lens on the lens holder with the tooth profile (D) to
the upside (if a motorized lens).
Fix the lens by closing the both locks until they are se-
cured.
Pivote the motor part fully downwards. Ensure that the
teeth of the motor matches 100% those of the tooth profile
(only for a motorized lens). If not, turn the lens a little.
While pushing down, tighten wing bolts (B) firmly to ensure
good functioning of safety latches and motorization.
Re-install the lens cover.
Step
Action
Image
Illustrations on
Removing the
Lens
Image 2
Image 1