1. PMP replacement Kit
1.
The projector is returned to the factory for a complete new 3-level uniformity alignment and software upgrade. When the pro-
jector returns, a full re-alignment based on 3 levels uniformity is done, beside the upgrade to V2.02.
This return can be an opportunity to replace the consumables like polars, analyzers and/or panels. In this
case a full TCR re-alignment will be done as well
1.
One does the upgrade himself and uses the special program
CGU625PW.exe
to make the new soft compatible with the old
1-level uniformity correction.
With this program the 1-level grey uniformity corrections are copied to the new empty tables and the full
white corrections are set to a "no correction" status. This all means that the uniformity is the same as
before, not improved by the upgrade…
New PMP board
The (first) PMP version R763067 was replaced by the R763864 due to a different mapping of new FPGA’s. This hardware change
has implied a change of the software version to V3.xx.
This means that the new PMP board R763864 requires software versions from V3.xx onwards.
V3.xx is not downwards compatible i.e. works only with the new PMP R763864 and does not work with the old PMP!
Whenever you replace the "old" R763067 by the newer version R763864 you
MUST
update the soft to minimum V3.01.
The procedure in case you replace the old PMP by the new version will depend on the existing software in the projector.
If the software in the projector is lower than V2.02, you have to upgrade to V3.01 and this will necessitate all 4 steps (as described
hereafter)
In case you have to change from a 1-level version to a 3-level uniformity version you can decide to return the projector to the factory
for an upgrade including the 3-level uniformity adjustment.
If however you decide not to return the projector, then, you can upgrade yourself provided that you run the program
CGU652PW.exe
(see later for more details).
Without this additional program the upgrade is impossible.
When the soft in the projector is V2.02 (thus already with the 3-level uniformity) you just have to upgrade to V3.01. No need to run
the special program.
1.2 The upgrades
Software files
When you unzip the V3.01 Reality 6500 software you get two files:
•
Br65.3.01_def.bin
: default upgrade
•
Br65.301.bin
: soft upgrade
How to upgrade from V1.xx to V2.02 with OLD PMP (R763067)
1. Unzipping the R6500 V3.01 soft you get two bin. files (see hereafter).
2. When you upgrade to V2.02 you just upgrade the soft with the default switch in the OFF position, not in the ON position as
described in step B hereafter.
3. Run the
CGU652PW.exe
program
How to upgrade from V1.xx to V3.01 with NEW PMP (R763864)
1. Upgrade of the default program
2. Reboot the CPU.
3. Upgrade the full software from default
4. Run the program
How to upgrade from V2.02 to V3.01 with NEW PMP (R763067)
1. Upgrade of the default program
2. Reboot the CPU.
3. Upgrade the full software from default
2
R5976881 R6000 SERIES PMP 15/03/2005
