![background image](http://html1.mh-extra.com/html/barco/prometheus-i/prometheus-i_safety-and-instruction-manual_4205255117.webp)
7. ICMP
7.5
ICMP reset button and status LEDs
ICMP status LEDs and Reset button
LEDs on ICMP front panel give information on the status of the device.
1
2
3
Image 7-7
Status overview PWR/ERROR and READY LEDs:
1
2
PWR/ERROR
READY
ICMP Status
Off
Off
Turned off
Red
Off
Board reset
Blinking Green
Off
Boot loader
Blinking Green
Blinking Orange
Operating System start up
Blinking Green
Orange
Security Manager - Image Integrity tests
Blinking Green
Blinking Yellow
Security Manager - Self Test
Blinking Green
Yellow
Security Manager - FPGA self-test
Green
Blinking Orange
Update ongoing
Green
Blinking Green
FIPS ok - Application startup
Green
Green
Power on & No Error
Blinking Red
Off
FIPS error
3
Reset button
Button used to reset ICMP (reference 3 image 7-7)
C
AUTION
:
It is not recommended to use the ICMP reset button if conventional means to stop and restart the
ICMP are always available. It is an ultimate resort in the event of complete blockage of interface.
C
AUTION
:
In case the ICMP is installed in a RGB-laser illuminated cinema projector it is recommended to put
the lasers in deconditioning state before pressing the reset button and condition them again from the moment
the ICMP is rebooted (after reset). Resetting the ICMP with lasers on can create a risk as the proper operation
of the DMD cooling cannot be guaranteed in this case.
R5905963 PROMETHEUS SERIES 09/03/2015
113
Summary of Contents for Prometheus I
