Barco PreCa 1280i Manual Download Page 22

Page: 22 / 23

– 21 –

Command:

s_RSOK

Set display of RS232C to ASCII character string

s_RSACK

Set display of RS232C to 1Byte code

Function:

These commands display the ASCII character strings of “OK CR/LF” and “NG

CR/LF” when this unit enables reception of 1Byte commands from the RS232C,

including ACK (06H), NAK (15H).

Whenever the power is turned on, the “s_RSACK” mode always appears. And

once registered, this command always turns on thereafter.

It turns on for the RS232C only.

Command:

date

Display of date/change (Telnet only)

time

Display of time/change (Telnet only)

Function:

These commands display and change the date that can be set for each unit.

When these commands are executed, the date and time set for this unit are

displayed.

Press the “ret” key if you do not want to make any changes.

To make a change, enter the value you want on the display.

Commands for Others

Summary of Contents for PreCa 1280i
























Search results

Summary of Contents for PreCa 1280i

Reviews:

Related manuals for PreCa 1280i

Brands by name

Popular brands

Barco PreCa 1280i, Manual

Search results

Summary of Contents for PreCa 1280i

Reviews:

Related manuals for PreCa 1280i

Brands by name

Popular brands