The lamp in this product contains
mercury. Please dispose of
properly.
(For US only.)
10.Tighten two screws (f) of the new lamp box tightly
using a Phillips screwdriver.
LAMP 2
LAMP 1
(f)
(f)
• Make sure that the screws are tightened firmly.
11.Insert the lamp cover (e) into the projector and
tighten two screws (d) on the lamp cover firmly
using a Phillips screwdriver.
(e)
(d)
• You cannot turn on the projector without
attaching the lamp cover.
12.Insert the side cover (c) into the projector and
tighten two screws (a) on the rear and two screws
(b) on the side of the side cover using a Phillips
screwdriver.
(c)
(b)
(a)
Reset of the lamp operation time
Reset the lamp operating time of the newly
installed lamp.
You can reset the lamp operation time using the menu.
(See page 30 for menu setting.)
13.Plug the power cord into the wall outlet.
14.Press the POWER key.
15.Display the FEATURE menu in the ADVANCED
menu.
16.Select ADVANCED menu by pressing the
or
key.
ADVANCED MENU
ENTER
17.Press the ENTER key.
18.Select
LAMP 1 TIME RESET or LAMP 2 TIME RESET
by
pressing the
or
key.
LAMP 1 TIME RESET
OK
LAMP 2 TIME RESET
OK
19.Press the ENTER key.
• The
dialog appears.
EXECUTE LAMP 1 TIME RESET ?
OK : ENTER CANCEL : MENU
20.Reset by pressing the ENTER key.
• When the lamp operating time isn’t reset, press
the MENU key.
Important:
• When the operation times of both lamps have
exceeded 4000 hours*, you can operate the
projector only for 3 minutes after turning on the
power. During this time, carry out steps 15 to 20 to
reset the lamp operation times.
• The projector doesn’t turn on if the lamp cover isn’t
attached securely.
• Be sure to reset the lamp operation time whenever
you replace the lamp.
• Do not reset the lamp operation time unless you
replace the lamp.
• The lamp is fragile. If it is broken, be careful not to
cut yourself with glass fragments.
*
When LAMP MODE is set to STANDARD, this duration
will be shorted to 2000 hours.
When removing the lamp from the ceiling-mounted
projector
When removing the lamp from the ceiling-mounted
projector, follow the same steps as “To replace the
lamp.”
