![background image](http://html1.mh-extra.com/html/barco/ph-series/ph-series_user-and-installation-manual_4202641081.webp)
7. Initial network settings
If the entered password is not correct,
CURRENT NETWORK PASSWORD
screen appears again.
A
OK
caps
CLEAR
DEL
CANCEL
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
0
1
2
3
4
5
6
7
8
9
←
→
↔
∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗
∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗
CONFIRM NETWORK PASSWORD
NEW NETWORK PASSWORD
Image 7-8
6. Enter the
NEW NETWORK PASSWORD
and
CONFIRM NETWORK PASSWORD
.
Password can be set using up to 32 characters including alphabets (capital/small) or numeric characters.
←
key:
Shifting the position of enter cursor to the left for each character.
→
key:
Shifting the position of enter cursor to the right for each character.
↕
key
Shifting the position of enter cursor between NEW NETWORK PASSWORD and CONFIRM NETWORK
PASSWORD.
DEL key:
Deleting the character in the position of enter cursor for each character.
caps/CAPS key:
Switching an alphabet character to CAPITAL or small.
CLEAR key:
Deleting all the entered characters.
7. When NEW NETWORK PASSWORD and CONFIRM NETWORK PASSWORD are matched, the setting is completed after chang-
ing the NETWORK PASSWORD.
-
When you select OK and the passwords you entered are matched, the setting change dialog is displayed. After the dialog
disappears, the NETWORK menu is displayed.
-
When you select CANCEL, the NETWORK menu is displayed without changing the password.
-
If the entered content is not matched, NEW NETWORK PASSWORD screen appears again after an error dialog is displayed.
-
The password for the web control software of CRESTRON cannot be changed with this setting.
-
It may take some time to re
fl
ect the settings.
7.4
IP Settings
7.4.1
Start up
How to display
1. Display the
NETWORK
menu.
2. Press the
▲
or
▼
key to select
IP CONFIG
.
IP CONFIG
ENTER
Image 7-9
3. Press the
ENTER
key.
IP CONFIG menu appears.
0. 0. 0. 0
0. 0. 0. 0
0. 0. 0. 0
IP CONFIG
DHCP
IP ADDRESS
SUBNET MASK
DEFAULT GATEWAY
MAC ADDRESS
SAVE SETTINGS
ON
OK
Image 7-10
7.4.2
Setting or Clearing DHCP
DHCP
Abbreviation for Dynamic Host Con
fi
guration Protocol. This protocol automatically assigns IP Address to networked
devices.
R5905597 PHXX SERIES 20/05/2014
77