![background image](http://html1.mh-extra.com/html/barco/overview-d-series/overview-d-series_user-manual_4198086024.webp)
3. Design and functions
Barco - OverView D series - Doc-3353-2 - user's manual - Revision 04 - April 2005
________________________________________________________________________
3-5
3.4
Principle of dual lamp system
The dual lamp system implemented in OverView D is based on a lamp lift which moves the respective lamp in
front of the stationary optics.
The lamps are moveable
The optics is stationary
The following identies apply:
Lamp Top == L1
Lamp Bottom == L2
The lift is the carrier of the lamps and can have two positions: lift
up
and lift
down
.
If the lift is in the
down
position,
the top lamp (Lamp1,
L1
,
Lamp Top
) is coupling light into the optical system (
P
)
If the lift is in the
up
position,
the bottom lamp (Lamp2,
L2
,
Lamp Bottom
) is coupling light into the optical system (
P
)
L1
L2
P
L1
L2
P
Liftposition
down
up
Figure 3-3
Lift positions
Since there are two lamps, the dual lamp system can have four states:
L1 on, L2 on
,
L1 on, L2 off,
L1 off, L2 on
,
L1 off, L2 off
L1
L2
L1
L2
L1
L2
L1
L2
Figure 3-4
Lamp states