![background image](http://html1.mh-extra.com/html/barco/overview-d-50/overview-d-50_installation-manual_4197749103.webp)
8. Final Adjustment and Configuration
OverView D 50" – DOC-3303-5 – installation manual – Revision 10 – September 2006
September 2006
September 2006
September 2006 ________________________________
________________________________
________________________________
________________________________________________________
________________________
________________________
________________________8-35
8.5.10
Save
igure 8-51
Service|Save
This entry opens a sub menu with the items Save now and Auto save:
Per default, every 15 minutes the projector saves all parameters. During this process, which lasts about 7
seconds, the projector is blocked for communication.
Since this might be annoying in some cases, the new functionalities
Save now
and
Auto Save
have been
introduced.
Auto Save
allows to disable or enable the regularly saving procedure. If disabled, the projector only stores back
a very small subset of the available data, a fast procedure which is hardly noticed. However, changes of
parameters like color coordinates will not be stored regularly. To store them, the
Save now
command has to be
given.
igure 8-52
enable/diasbale Auto Save
When the projector is sw itched to standby, it w ill store all data. No extra "Save now "
command has to be given.