![background image](http://html1.mh-extra.com/html/barco/overview-cdg67-dl/overview-cdg67-dl_installation-manual_4192338021.webp)
3. Mechanical setup
Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005
________________________________________________________________
3-2
3.2
Preassemblies
When connecting the profiles, make sure to use nippled hammer
When connecting the profiles, make sure to use nippled hammer
When connecting the profiles, make sure to use nippled hammer
When connecting the profiles, make sure to use nippled hammer
bolts ("long" hammer bolts, 25mm)!
bolts ("long" hammer bolts, 25mm)!
bolts ("long" hammer bolts, 25mm)!
bolts ("long" hammer bolts, 25mm)!
PA01
Use profile r810237 (feet profile) to make the
preassembly 01, *the length can be different in
case of a customized feet height. First place the
two brackets with JP01 and JP02, end with the
third bracket which is aligned to the top of the
profile. Notice that according to the drawing
the inside thread is pointing downwards. Use
jig JP01 (45mm) and jig JP02 (456.7 mm) to
place the brackets.
PA02