5. OLite rental peripherals and accessories
W
ARNING
:
Always secure all truss beams of a hanging OLite rental display with the truss installation. Use
therefore the safety eyebolts. One safety eyebolt has a maximum loading capacity of 800 kg. Secure each
eyebolt with an independent safety cable. Never loop a safety cable through both safety eyebolts of a truss
beam, as this will dramatically reduce the load holding capacity of the safety eyebolts.
5.4 Power boxes
General
Depending on the size of the OLite display system, the power system has to be adapted. Therefore several sizes of power boxes
are available. For small and medium size OLite display systems the “Mono Phase Power Box” is used. For larger OLite display
systems there is a range of “Custom Power Boxes”. There is also a “Rental Power Box” available. Refer to the manual of the power
box used in the application for more information.
5.5 Digitizer
General
The digitizer processes (image processing, conversion and conditioning) all source signals for digital distribution to every tile. The
digitizer may be accessed directly or via the control software (e.g. XLite Toolset). This software is designed as a user interface
to be used in conjunction with the digitizer and display, this can be used when connected to the digitizer through a serial RS232
connection. Refer to the manual of the digitizer for more information about the digitizer.
5.6 Fiberlink system
General
The data signal coming out of the digitizer is transported from the digitizer to the display by a high-speed data link. To send such
a high density stream of data over long distances, a fiber optic cable is required. Barco offers a complete system: a transmitter, a
cable and a receiver.
Barco offers two different fiberlink systems: one for shorter distances, based on a multi mode optical fiber, and one for longer dis-
tances, based on a single mode optical fiber. Refer to the manual of the fiberlink system for more information about the fiberlink
system.
5.7 Control software
General
The control software is designed as a graphic user interface (GUI) and can be used to control and configure the digitizer as well as
the Barco LED wall via a PC (e.g. XLite Toolset). Refer to the manual of the control software for more information about the control
software.
22
R5976832 OLITE RENTAL DISPLAY 15/12/2004
Summary of Contents for OLite 510
