![background image](http://html1.mh-extra.com/html/barco/nx-4/nx-4_installation-manual_3851381011.webp)
1. Safety
1.4
Proper usage
Proper usage of NX
fi
xed tiles
•
No part of the NX tile can come in contact with any type of moisture.
•
No part of the NX tile can come in contact with any type of abrasive.
•
No part of the NX tile can come in contact with any type of dust.
•
No part of the NX tile can come in contact with any type of corrosive substance.
•
NX tiles are to be used in environments meeting the operating speci
fi
cations.
•
NX tiles are not to be used in environments that are subject to airborne contaminants such as that produced by smoke machines
(cracked oil) or similar (these deposit a thin layer of greasy residue upon the LEDs optics, degrading performance).
•
NX tiles are not to be exposed to extreme localized heat or cold exceeding the temperature speci
fi
cations.
•
NX tiles are not to be exposed to any element or situation that will cause any part of the display to heat beyond what occurs
during normal operation. Such situations include but are not limited to lasers, ultrasonic vibration, or any type of substance that
prevents proper ventilation and heat radiation of the NX tiles.
•
NX tiles are not to be exposed to circumstances where moisture can condense or collect on any components.
•
Power connected to the NX tiles must meet the speci
fi
cations outlined in the installation manual.
•
Avoid any accidental bumping of the tile corners while installing or removing the NX tiles. Since LED’s of the NX tiles are
mounted near by the edges of the LED boards, which is unavoidable in the design of a high resolution LED-wall, the corners of
the NX tiles become sensitive for mechanical damage. Because of that it is required to handle the NX tiles with care at all times.
•
Never place an NX tile or an NX module upon a surface with the LED’s facing downwards. This to prevent damage to the LED’s
and the soft lens of the LED’s.
•
While removing or installing an NX module always keep the LED side of the NX module parallel with the LED side of the
remaining neighboring NX modules. This to avoid any mechanical stress upon the corners of the NX module.
•
No force can be applied to the LED’s. Any LED’s damaged due to mechanical stress are not covered by the warranty.
•
Safety and functional features of the display cannot be defeated.
•
It is not allowed to climb or hang any additional equipment on the back of an NX wall. Nothing is to be allowed to hang from
the cables of an NX
fi
xed tile.
•
Any failures must be immediately and appropriately dealt with (equipment returned to Barco?). Failing equipment cannot be
left to run in a wall.
•
Only Barco cables speci
fi
ed to be used with the NX display are to be used to connect components in an NX wall. Further, care
must be taken to connect signal only according to the installation manual.
•
NX tiles are not to be used in the vicinity of any equipment that is not CE and UL/ETL certi
fi
ed.
•
NX tiles are not to be connected to any non-Barco equipment (the NX tiles are NOT HDMI compatible devices, despite the use
of HDMI-style connectors).
•
When reconnecting components in an NX tile, care must be taken to ensure that cables are carefully routed according to the
installation manual to prevent damage to the cables or other parts of the NX tile.
•
NX modules can only be removed by either gently pushing by hand from the back of the module, or by using the approved front
access tools and method described in the installation manual.
•
LED module shaders can only be removed using the approved shader removal tool and the method described in the installation
manual.
•
NX tiles can be cleaned only in accordance to the procedures de
fi
ned in the installation manual.
•
The NX
fi
xed display is an indoor product. Use the NX
fi
xed tiles only in a dry area away from direct sunlight, dust and moisture.
Never install and use the NX
fi
xed tiles in an outdoor environment.
R59770279 NX FIXED 16/06/2008
7
Summary of Contents for NX--4
