Barco Nio MKII, Installation & User Manual

Page: 55 / 131

BarcoMed Driver Tab
Nio MKII 55
BarcoMed Driver Tab
Introduction
After the BarcoMed Windows display controller driver is installed, a new
Display Properties tab is available for configuring special features of the
BarcoMed display controller.
Languages supported
The BarcoMed Driver Tab supports the following languages:
English (U.S) (default)
Dutch
French
German
Italian
Japanese
Korean
Simplified Chinese
Traditional Chinese
To change between the languages select the correct region via the
Regional Settings Control Panel in your machine’s Start > Settings >
Control Panel.
Using the BarcoMed Driver Tab
Please note that you must have logged on to Windows using an
account with administrator privileges in order to use the BarcoMed
Tabs of the Windows Display Control Panel to change any display
settings.
1.
Open the “Display Properties Control Panel” by right clicking on the
desktop, then select
“Properties”
.
2.
Under Windows 2000 or Windows XP, click on
“Settings”
tab.
Double click on the rectangle that represents the Barco display
whose settings you wish to change to bring up its property page.
Click on the “BarcoMed Driver” tab ( see figure 22).