Barco Nio Color 2 MP, User Manual

Page: 19 / 38

K5902134 /04 Nio Color 2MP 23" 19
The available white point settings for your display are:
• Native : The native, unmodified color temperature of the LCD panel.
• 6500K : Corresponds to a color temperature of 6500 Kelvin (D65).
• 7500K : Corresponds to a color temperature of 7500 Kelvin (D75).
To select the white point
1. Bring up the OSD main menu.
2. Navigate to the Adjustments > White point menu.
3. Select one of the available white point presets.
3.10 Power save mode
About power save mode
Enabling power save mode on your Nio Color 2MP 23" will optimize the display lifetime by automatically
switching off the backlight when no video signal is detected after approximately 10 seconds.
To enable/disable power save mode
1. Bring up the OSD main menu.
2. Navigate to the Adjustments > Settings menu.
3. Enter the Power save submenu.
4. Select On or Off as desired and confirm.
3.11 OSD menu language
About the OSD menu language
By default, the OSD menu comes up in English. However, there ’ s a wide range of other languages available
for the OSD menu of your Nio Color 2MP 23".
To select the language of the OSD menu
1. Bring up the OSD main menu.
2. Navigate to the Adjustments > Settings menu.
3. Enter the OSD Language submenu.
4. Select one of the available languages.
3.12 Factory reset
About factory reset
A factory reset allows you to fully restore the display to its original factory setting.
To perform a factory reset
1. Bring up the OSD main menu.
2. Navigate to the Adjustments > Settings menu.
3. Enter the Factory Reset submenu.
4. Select Press enter to confirm .
Operation