Barco Nio 5MP LED, User Manual

Page: 21 / 51

4. Advanced operation
When DPMS mode is enabled on your display, an additional OSD power saving function
becomes available: hibernate. Please refer to "Hibernate", page 19 for more information
on hibernation and how to enable this function.
To enable/disable DPMS mode on your display:
1. Bring up the OSD main menu.
2. Navigate to the Con fi guration > Power Management menu.
3. Enter the DPMS Mode submenu.
4. Select Enabled/Disabled as desired and con fi rm.
4.7 Hibernate
About hibernate
When hibernate is enabled, not only the backlight will be switched off, but also other functionalities will be
disabled to further reduce power consumption to a minimum. This happens after a speci
fi c period of time
which can be manually adjusted.
Hibernate can only be enabled on your display when the DPMS mode is enabled fi rst.
Therefore, please refer to "DPMS mode", page 18 to do this.
Please connect your keyboard or mouse to your PC rather than to the display’s USB
ports when hibernate is enabled.
To enable/disable hibernation on your display:
1. Bring up the OSD main menu.
2. Navigate to the Con fi guration > Power Management menu.
3. Enter the Hibernate submenu.
4. Select Enabled/Disabled as desired and con fi rm.
To specify the hibernate time-out:
1. Bring up the OSD main menu.
2. Navigate to the Con fi guration > Power Management menu.
3. Enter the Hibernate Timeout submenu.
4. Set the time-out value as desired and con fi rm.
4.8 Luminance target
About the luminance target
The luminance target of your Nio 5MP LED Display is adjustable over a prede fi ned range. When you
change the luminance target, the display will adjust its backlight to reach the target.
K5902121 NIO 5MP LED DISPLAY 18/01/2018 19