Barco Nio 5MP LED, User Manual

Page: 12 / 51

2. Installation
5. Route all cables through the cable duct in the stand of your display. For better strain-relief and shield-
ing of the cables, fi x the cables with the cable straps at the inside of the connector compartment.
Image 2-8
6. Close the connector compartment cover. You will hear a “click” sound when the cover is in position.
Image 2-9
7. Connect the external DC power supply to a grounded power outlet by using one of the power cables
included with the display.
2.3 VESA-mount installation
C
AUTION
:
Use suitable mounting apparatus to avoid risk of injury.
W
ARNING
:
Never move a display attached to an arm by pulling or pushing the display
itself. Instead, make sure that the arm is equipped with a VESA approved handle and
use this to move the display.
Please refer to the instruction manual of the arm for more information and instructions.
10 K5902121 NIO 5MP LED DISPLAY 18/01/2018