Barco Nio 3MP LED, User Manual

Page: 7 / 52

K5902157-01 Nio 3MP LED Display
7
6. Power status LED
• Off: Display not powered, or display operational but power LED function disabled in OSD (see “ Power
LED ” , page 22)
• Steady white: Display operational
• Slow blinking amber: Display in suspend mode (requires DPMS mode to be enabled in the OSD menu,
see
“ DPMS mode ” , page 23)
• Fast blinking amber: Display in standby mode (requires DPMS mode to be enabled in the OSD menu,
see
“ DPMS mode ” , page 23)
• Steady amber: Display switched off via the standby key, or display in hibernate mode (requires DPMS
mode and Hibernate to be enabled in the OSD menu, see
“ DPMS mode ” , page 23 and “ Hibernate ” ,
page 24)
7. Front sensor
Back
7
6
8
9
10
5 1 2 3 4
Image 1-2
1. DisplayPort video input
2. DVI video input
3. USB-B 2.0 upstream connector 1
4. USB-A 2.0 downstream connectors (2x)
5. +24 VDC power input
6. Connector compartment cover
7. Kensington security lock
8. VESA mount cover plate
9. Cable duct
10. Foot lock clip
Welcome!
1: Always connect the display(s) to a USB 3.0 hub if available. A USB 2.0 hub may be used but may not support more than two
connected displays. If insufficient USB resources are available on the PC, the USB cable may be left unattached and the display will
communicate essential QC information using DDC on the video cable, albeit more slowly; USB peripherals will also be ignored.