Barco MVGD 1319, Installation & User Manual

Page: 26 / 64

Operation
26
3.
To exit from a menu, rotate the control wheel to select EXIT.
- Press the wheel shortly to return to the previous menu.
- Press the wheel longer to return to the Main Menu.
If you exit from the Main Menu, you exit the OSD.
4.
To change an adjustment value (e.g., in contrast, brightness,
luminance, some geometry and phase adjustments), rotate the
control wheel to select the adjustment and press the wheel
shortly.
The adjustment name and value are highlighted. Rotate the wheel
to change the value. Next, click the wheel shortly to confirm the
change and exit the adjustment mode.
5.
To select a value from a predefined list (e.g., Input Selection),
rotate the control wheel to select the desired menu and press the
control wheel shortly. The list of possible selections appears.
Rotate the wheel to select the desired item and click shortly. The
new selection is indicated with a “V” mark at the right. Next,
rotate the wheel to select “Exit” and click shortly to return to the
menu.
MVGD 1319
MAIN MENU
Autosetup
Contrast
Brightness
Luminance
Adjustments
Input Selection Auto
Settings
Preset
Information
EXIT
ADJUSTMENTS
Low Pass Filter
Geometry
Phase
EXIT
1.
Rotate the control wheel
2.
Press the control wheel
1
2