Barco MDSC-8358 MNA, User Manual

Page: 30 / 54

K5902141 (451920612593) /02 MDSC-8358 MNA
30
•
Failover input
5.7.1 Input channel menu
About input channel menu
Possibility to select the following inputs:
• OPTICAL
• DISPLAYPORT
• OPTICAL FAILOVER
• DISPLAYPORT FAILOVER
• DVI 1
• DVI 2
• DVI 3
• DVI 4
• 4 DVI Single Link
• 2 DVI Dual Link
To select an input
1. Bring up the OSD main menu.
2. Navigate to the Input menu.
3. Enter the Input submenu.
4. Select one of the available inputs and confirm.
5.7.2 Failover input
About failover input
This function allows the display to automatically switch to a failover (backup) source in case the DisplayPort or
Optical input main source is missing. The display will automatically restore the main source once the signal is
back.
The available failover inputs for your display are:
• DVI1
• DVI3
The failover input will be activated within about 1 second after the main input (DisplayPort) has been
lost.
The failover input will be activated within about 8 seconds after the main input (Optical input) has
been lost.
During the transition from main to failover input and vice versa, a text message is visible to inform
the user.
The main source can be changed while the failover input remains unchanged. During the selection
and synchronization of a new main source the failover function is temporary (7 sec) disabled.
To select the failover input
1. Bring up the OSD main menu.
2. Navigate to the Input menu.
Advanced operation