Barco MDSC-8358 MNA, User Manual

Page: 29 / 54

K5902141 (451920612593) /02 MDSC-8358 MNA
29
5.4 Transfer function
About transfer function
There are different transfer function possibilities:
• Native: the transfer function is transparent (no correction is applied).
• DICOM (Factory): The output curve follows the DICOM transfer function and is automatically adapted to
the current brightness.
• Gamma (Factory): The output curve follows the gamma transfer function; the value can be set between 1
and 4. The default value is 2.42.
• User LUT: The monitor output is corrected according to a predefined user LUT. which can be downloaded
inside the monitor.
To select the transfer function
1. Bring up the OSD main manu.
2. Navigate to the Transfer menu.
3. Enter the Transfer submenu.
4. Select one of the available functions and confirm.
5.5 Color temperature settings
About color temperature settings
The current color temperature can be set from 2000°K to 12000°K in steps of 100°K.
To change the color temperature settings:
1. Bring up the OSD main menu.
2. Navigate to the Color temp menu.
3. Enter the Color temp submenu.
4. Change the Color Temp as desired with the Up/Down keys and confirm.
5.6 Color gamma settings
About color gamma setting
The current color gamma can be adjusted from 1 to 4 in steps of 0.1. This can be useful i. e. to adjust the
gamma image depending on the type of content displayed on the monitor.
To change the color gamma settings:
1. Bring up the OSD main menu.
2. Navigate to the Gamma menu.
3. Enter the Gamma submenu.
4. Change the Gamma comp as desired with the Up/Down keys and confirm.
5.7 Input channel selection
Overview
•
Input channel menu
Advanced operation