Barco MDSC-8358 MNA Series, User Manual

Page: 6 / 54

K5902141 (451920612593) /02 MDSC-8358 MNA
6
1.1 About the product
Overview
The Barco Medical Grade MDSC-8358 MNA series are color high resolution liquid crystal displays especially
designed for medical imaging applications.
The MDSC-8358 MNA is a 58 ” Color Flat Panel Display, intended to replace typical multi-monitor arrays in
medical applications, whenever a large display is needed in addition to high resolution, while offering the same
good rendering in greyscale medical imaging thanks to the DICOM conformance. It has been designed to
meet the specific need of typical monitor set-up in examination rooms, where monochrome and color pictures
have to be displayed and freely positioned over the display, when processed by a suitable graphic engine.
The MDSC-8358 MNA shall provide 8 MP screen resolution, high luminance and accept digital inputs,
according to the DVI standard, with the native panel resolution of 3840 x 2160.
The MDSC-8358 MNA can operate as a decoder or a Dual Link monitor.
Other important features like the very large viewing angle, the high brightness level, the backlight stabilization,
the grayscale correction and the compliance with the DICOM standards, will help the users avoiding
misinterpretation in medical diagnosis.
The MDSC-8358 MNA is also suitable for viewing a large range of contents, as color temperature and color
gamma adjustments are provided. The display can also be controlled by remote, through a serial or Ethernet
communication link. The MDSC-8358 MNA shall be supplied with VESA 400 mounting interfaces.
The MDSC-8358 MNA is available in four versions:
• MDSC-8358 MNA: 2 power supplies, no glass, no DVI Splitter
• MDSC-8358 MNAG: 2 power supplies, with glass, no DVI Splitter
• MDSC-8358 MNAF: 2 power supplies, no glass, with DVI Splitter
• MDSC-8358 MNAH: 2 power supplies, with glass, with DVI Splitter
1.2 What's in the box
Overview
Your MDSC-8358 MNA display comes with:
• MDSC-8358 MNA user guide
• Hoist bracket (2 pcs)
• Screws for the hoist bracket (8 pcs)
• O-rings for the screws of the hoist bracket (8pcs), to be used in the display with the protection glass
• Plastic cap (8pcs), to be used in the display without the protection glass
• Screws for the VESA mount (16pcs)
• O-rings for the screws of the VESA mount (16pcs)
• DVI dual link cables 1.8m (2 pcs)
• DVI single link connection cables 0.5m (2 pcs)
• AC power cords (1 pcs EU & 1 pcs US)
Keep your original packaging. It is designed for this display and is the ideal protection during
transport.
The user guide is available in other languages on www.barco.com .
Welcome!