Barco MDSC-8358 MNA Series, User Manual

Page: 35 / 54

K5902141 (451920612593) /02 MDSC-8358 MNA
35
Power cords:
• Utilize a UL-listed detachable power cord, 3-wire, type SJ or equivalent, 18 AWG min., rated 250 V min.,
provided with a hospital-grade type plug 5-15P configuration for 120V application, or 6-15P for 240V
application.
• Do not overload wall outlets and extension cords as this may result in fire or electric shock.
• Mains lead protection (U.S.: Power cord): Power cords should be routed so that they are not likely to be
walked upon or pinched by items placed upon or against them, paying particular attention to cords at plugs
and receptacles.
• Use a power cord that matches the voltage of the power outlet, which has been approved and complies
with the safety standard of your particular country.
Connections
Any external connection with other peripherals must follow the requirements of clause 16 of IEC60601-1 3rd
ed. or Table BBB.201 of IEC 60601-1-1 for the medical electrical systems.
Connection of PEMS by network/data coupling to other equipment (MDSC-8358 MNA
version only)
• Connection of the PEMS to a network/data coupling that includes other equipment could result in
previously unidentified risks to patients, operators or third parties.
• The responsible organization should identify, analyze, evaluate and control these risks.
• Subsequent changes to the network/data coupling could introduce new risks and require additional
analysis.
• Changes to the network/data coupling include:
- changes in network/data coupling configuration;
- connection of additional items to the network/data coupling configuration;
- disconnecting items from the network/data coupling configuration;
- update of equipment connected to the network/data coupling configuration;
- upgrade of equipment connected to the network/data coupling configuration
Water and moisture
The equipment is IP20 compliant (IP21 for versions with protective glass).
Moisture condensation
Do not use the monitor under rapid temperature and humidity change conditions and avoid direct contact with
cold air from air-conditioning outlet.
Moisture may condense on the surface or inside the unit, which may cause a mist residue on the front glass.
Although this is not a malfunction of the product itself, it may cause damage to the monitor.
If condensation appears, unplug the monitor from the power source and allow enough time to restore to its
normal condition (i.e. until condensation disappears) before switching the monitor back on.
Ventilation
Do not cover or block any ventilation openings in the cover of the set. When installing the device in a cupboard
or another enclosed location, heed the necessary space between the set and the sides of the cupboard.
Installation
• Place the equipment on a flat, solid and stable surface that can support the weight of at least 3
equipments. If you use an unstable cart or stand, the equipment may fall, causing serious injury to a child
or adult, and serious damage to the equipment.
• Do not allow to climb or rest on the equipment.
• When adjusting the angle of the equipment, move it slowly so as to prevent the equipment from moving or
slipping off from its stand or arm.
• When the equipment is attached to an arm, do not use the equipment as a handle or grip in order to move
the equipment. Please refer to the instruction manual of the arm for instructions on how to move the arm
with the equipment.
• Provide full attention to safety during installation, periodic maintenance and examination of this equipment.
Important information