5. Advanced operation
3. Enter the
Sharpness
submenu.
The command bar
Sharpness
is highlighted.
4. Set the sharpness level as desired and con
fi
rm.
Sharpness control is not available when DisplayPort mode
DP 1.1 dual
is selected (see
"DisplayPort mode", page 26).
5.2
Picture advanced menu
5.2.1
Black Level
About black level
This command allows to add or subtract an offset to the input video signal (available only on video formats).
To adjust the black level
1. Bring up the OSD main menu.
2. Navigate to the
Picture advanced
menu.
3. Enter the
Black Level
submenu.
The command bar
Black Level
is highlighted.
4. Set the black level as desired and con
fi
rm.
5.2.2
Latency
About latency
The video latency is de
fi
ned as the delay between the time of a monitor input video transition to the cor-
responding light output transition on screen.
The available latency modes for your display are:
•
Diagnostic: Best picture quality
•
Surgical: Lowest latency, optimized for fast moving images
To select the latency mode
1. Bring up the OSD main menu.
2. Navigate to the
Picture Advanced
menu.
3. Enter the
Latency
submenu.
4. Select one of the available latency modes and con
fi
rm.
5.2.3
Image Size
About image size
The available image sizes for your display are:
•
Aspect (
fi
ll the screen on largest dimension, no modi
fi
cation in image aspect-ratio)
•
Native (input pixel to LCD pixel mapping, no scaling)
24
K5902133 (451920612482) MDSC-8255 23/11/2017
