Barco MDSC-2242, User Manual, Page: 39 / 64

K5903030 (451920611336) /05 MDSC-2242
39
•
2 nd Picture Source
•
2 nd Picture Position
•
Picture Swap
5.3.1 Main Source (Primary Source)
About main sources
The available main sources for your display are:
• Auto Search
• Composite
• S-Video
• Component
• PC Analog
• DVI 1
• SDI 1
• Nexxis
• DisplayPort
Available main sources dependent on display model.
The main source can also be selected through a shortkey function.
To select the main source
1. Bring up the OSD main menu.
2. Navigate to the Display Format menu.
3. Enter the Main Source submenu.
4. Select one of the available main source and confirm.
Note: If you selected the Auto Search preset, the display will automatically detect the connected
signal.
5.3.2 Component Mode
About component modes
The available component modes for your display are:
• YPbPr
• RGB
To select the component mode
1. Bring up the OSD main menu.
2. Navigate to the Display Format menu.
3. Enter the Component Mode submenu.
4. Select one of the available component modes and confirm.
Advanced operation