Barco MDSC-2242, User Manual, Page: 41 / 64

K5903030 (451920611336) /05 MDSC-2242
41
To select the 2 nd picture mode
1. Bring up the OSD main menu.
2. Navigate to the Display Format menu.
3. Enter the 2 nd Picture Mode submenu.
4. Select one of the available 2 nd picture modes and confirm.
Multi image in Full HD available with any combination of input sources.
Multi image in SD video available with any combination of input source except Composite & S-
video.
5.3.6 2 nd Picture Source
About 2 nd picture sources
The available 2 nd picture sources for your display are:
• Auto Search
• Composite
• S-Video
• Component
• PC Analog
• DVI 1
• SDI 1
• Nexxis
• DisplayPort
Independent Transfer Function:
Gamma and Color temperature for the 2nd Picture Source are always set to Native and 6500K
independently from the Transfer Function applied to the Main Picture Source. For a perfect
visualization of a X-ray image please select the X-ray input signal as Main picture and, if needed,
the Video image as 2nd picture.
To select the 2 nd picture source
1. Bring up the OSD main menu.
2. Navigate to the Display Format menu.
3. Enter the 2 nd Picture Source submenu.
4. Select one of the available 2 nd picture sources and confirm.
5.3.7 2 nd Picture Position
About 2 nd picture positions
The available 2 nd picture positions for your display are:
• Top Right
• Top Left
• Bottom Right
• Bottom Left
To select the 2 nd picture position
1. Bring up the OSD main menu.
2. Navigate to the Display Format menu.
3. Enter the 2 nd Picture Position submenu.
4. Select one of the available 2 nd picture positions and confirm.
Advanced operation