15
R5913216 /03
MDPC-8127
Image 2
–
2
Image 2
–
3
WARNING:
The height can be locked only when the display is in the lowest position, even though
the slider at the back of the stand can be moved to the lock position at any height of the display.
2.3 Cable connections
To connect the cables
1. Remove the connector cover. Do this by gently pulling the bottom of the connector cover away from the
display.
Image 2
–
4
2. Connect the DisplayPort input(s) (DP IN 1 and/or DP IN 2) with the DisplayPort output(s) on the
workstation.
Note:
To obtain full resolution and full refresh rate, two DisplayPort video input cables must be connected
to the display. If only one DisplayPort video input cable is connected the display will run at half of the
specified refresh rate.
Note:
When two DisplayPort video inputs are connected you can easily switch between them in the OSD
menu. See
, page 34
for more info.
Summary of Contents for MDPC-8127
