R5913170 /00
MDFC-8232
40
5.4.4 Recall Profile
About recalling profiles
To recall a profile means to restore the default factory settings (Factory and X Ray profiles) or recall the user
defined profiles.
The available profiles to recall from your display are:
•
Factory
•
X Ray
•
User 1
•
User 2
•
User 3
To recall a profile
1. Bring up the OSD main menu.
2. Navigate to the
Configuration
menu.
3. Enter the
Recall Profile
submenu.
4. Select one of the available profiles to recall and confirm.
5.4.5 Save Profile
About saving profiles
The user can modify the default video parameters associated to each profile and save the new parameter
settings under the User 1, User 2 or User 3 profile. The Factory and X Ray profiles can be modified, but the
factory default can
’
t be overwritten and can always be recalled through the recall profile menu item.
The available profiles to save in your display are:
•
User 1
•
User 2
•
User 3
To save a profile
1. Bring up the OSD main menu.
2. Navigate to the
Configuration
menu.
3. Enter the
Save Profile
submenu.
4. Select one of the available profiles to save and confirm.
5.5 System menu
5.5.1 Power on DVI
About power on DVI
This setting allows you to select the pin of the DVI connector on which the +5V DC supply is applied.
The available options are:
•
Disabled
•
+5V on Pin 14
•
+5V on Pin 16
To select the power on DVI
1. Bring up the OSD main menu.
2. Navigate to the
System
menu.
3. Enter the
Power on DVI
submenu.
4. Select one of the available options and confirm.
Summary of Contents for MDFC-8232 3SW
