5. Advanced operation
To manually select a grayscale conversion mode:
1. Bring up the OSD main menu.
2. Navigate to the
Con
fi
guration > Image Source
menu.
3. Enter the
Grayscale Conversion
submenu.
4. Select one of the available color conversion modes and con
fi
rm.
5.23 EDID timings
About EDID timings
Following EDID timings are available for your Coronis 5MP LED Display:
Refresh Rate
Allows to manually select the refresh rate of the
image source video input signal depending on the
maximum refresh rate of the display controller
connected to your display.
Preferred Orientation
Allows to change the orientation of the image
source video input signal to landscape, portrait or
to let the display automatically assign the correct
orientation.
Color Depth
Allows to change the color depth to 8 or to 10 bit.
To manually set EDID timings:
1. Bring up the OSD main menu.
2. Navigate to the
Con
fi
guration > Image Source
menu.
3. Enter the
Timings
submenu.
4. Select
Refresh Rate, Preferred Orientation
or
Color Depth
.
5. Select one of the available settings and con
fi
rm.
5.24 Display info
About display info
Your display serial number, color type, native resolution,
fi
rmware versions, etc. are available in a dedi-
cated submenu of the OSD menu.
To retrieve info about your display:
1. Bring up the OSD main menu.
2. Navigate to the
About this Display
menu to make the information visible on the screen.
5.25 Display status
About display status
The Status submenu of the OSD menu provides info on the current status of your display (runtimes, tem-
peratures, etc.), the status of the connected image sources (video encoding mode, timings, etc.), the
current calibration status of your display (display function, luminance, ALC, etc.) and the status about
activated connections.
K5902074 CORONIS 5MP LED DISPLAY 19/12/2014
31