6. Setup and configuration
6.4
Setting the MCM-400 HFR address
Introduction
The MCM-400 HFR has two different IR addresses:
•
Common address.
•
Device address;
The
Common address
is typically used to address multiple MCM-400 HFRs at once or to address the device at its very
fi
rst use. By
default, the common address is set to
0
, but it can be set to
1
as well to avoid interaction with other non-Barco devices, programmed
to the same IR address.
The
Device address
is used to address one MCM-400 HFR at a time. This address can be set in the range 0..255 (default is
1
). It
must be taken into account however that a standard RCU can only communicate with devices having their address set in the range
0..9.
The MCM-400 HFR address and the RCU address must be set to the same value to allow communication.
Setting the MCM-400 HFR address
1. In the OSD, navigate to
Installation > IR address...
and press
ENTER
to select.
Image 6-6
2. In the
addresses
dialog box,
fi
ll out the desired value for the addresses.
-
Device address.
-
Common RC5 address
Image 6-7
3. Exit the menu.
46
R5909056 MCM-400 HFR 11/05/2016
Summary of Contents for MCM-400 HFR
