3. Network integration
3.2
Green BCM Client interface
The LAN interface labeled CLIENT on the Green BCM comes with the static IP address 192.168.10.1.
If the PC/Laptop is not a member of the video wall subnet (i.e. connected to the LAN switch of the video wall),
the PC/Laptop to configure and control Green BCM needs to connect to the interface of Green BCM via its inter-
face labeled CLIENT.
Therefore the PC / Laptop needs to get a static IP address in the same address range, e.g. 192.168.10.2.
Connect a PC to the CLIENT interface of Green BCM via a network cable.
Make sure that the PC is running.
Windows 7:
Select
Control Panel\Network and Internet\Network Connections
With the respective adapter selected, click on
Change settings of this connection
.
On the dialog,
select Internet Protocol Version 4 (TCP/IPv4)
.
Click
Properties
.
Make sure to select
Use the following IP address
and enter IP address, subnet mask and gateway:
Barco - Barco Wall Control Manager OVD/KVD/IVD - R591337 - user manual - Revision 04 - March-2016
_______________________________________________
16
