![background image](http://html1.mh-extra.com/html/barco/k9352021/k9352021_user-manual_4082489034.webp)
K5902133 (451920612484) /03
MDSC-8255
34
The failover input can only be selected when both
1. the
Auto search
function is disabled (see
“
”
, page 33), and
2. the
PiP/PaP Modes
function is disabled (see
“
”
, page 34 and
If any of both functions are enabled then failover will be disabled and made unavailable. As soon as
both functions are disabled again, failover will be enabled and made available again with the
selected failover input.
The failover input will be activated within about 7 seconds after the main source has been lost.
During the transition from main to failover input and vice versa, a text message is visible to inform
the user.
The main source can be changed while the failover input remains unchanged. During the selection
and synchronization of a new main source the failover function is temporary (7 sec) disabled.
To select the failover input
1.
Bring up the OSD main menu.
2.
Navigate to the
Input Select
menu.
3.
Enter the
Failover Input
submenu.
4.
Select one of the available failover inputs and confirm.
5.3.5 Picture and Picture input
About Picture and Picture input
This function allows the display to show a second input source on the left side of the display. The Primary input
(main source) is still displayed on the right half of the screen.
The possible Picture and Picture combinations between the Primary input (main source) and the Secondary
input (PaP image) is displayed in the following table.
Primary input
Secondary input
DP 1.1
•
HDMI 2.0
–
1
•
HDMI 2.0
–
2
•
DVI
•
SDI
HDMI 2.0
–
1
HDMI 2.0
–
2
•
DP 1.1
•
DVI
•
SDI
DVI
SDI
•
DP 1.1
•
HDMI 2.0
–
1
•
HDMI 2.0
–
2
Both primary and secondary input are limited to FHD resolution max.
The Video Parameters applied to the Primary input Source are also applied to the Secondary input.
The 2nd source keeps the same image size (Native/Aspect) as the Primary input Source.
Summary of Contents for K9352021
