Level A to/from level B SDI conversion and minimum delay
mode
ImagePRO-II converts level A SDI signals to level B and vice versa allowing cameras
and monitors that support only these formats to be connected to other devices. In both
applications the latency can be reduced to three lines by enabling the minimum delay
mode. In minimum delay mode, internal scaling is disabled and the output resolution
matches the input resolution.
Live events without ImagePRO
would be tough. It’s the
workhorse for the
industry, with perfect
performance and an attractive ROI.
Georg Rössler, CT Germany
Remote control via web browser
An integrated web page server provides remote control to configure and switch the
ImagePRO-II. This powerful integrated web interface also enables system diagnostics,
import and export of png logo files and firmware upgrades.
USB backup, restore and upgrade
Via a USB flash drive you can back up settings, logos and even upgrade your firmware.
When you need to copy settings from one system to another, you can simply copy the
configuration to the USB drive and move it to the next unit for a quick and easy dupli-
cate of the first unit’s settings. In this way, multiple units can be set up and configured
in just a few minutes.
Online software management
When connected to the Internet, ImagePRO-II can check for the latest software release.
If necessary, it will download and upgrade its firmware automatically, keeping your
unit’s functionality up to date.
Multiple unit control
Multiple ImagePRO-II units can be controlled via a web browser, without installing a
separate control application. After discovery and setup, one or more units can be en-
abled to accept source changes or transitions.
Simple setup and advanced control
