Barco ILite 6, Service Manual

Page: 65 / 82

A. On screen display messages
OSD message
Description
FIRM
ERROR
B1.02
C1.20
Unable to read the fi rmware version of the re-sync unit (second line).
Displaying fi rmware version controller (third line) and the fi rmware version of the driver (fourth line).
I2C-
ERROR
EEPR.
CTRL.
I
2
C error occurred while reading the EEPROM on the controller unit.
I2C-
ERROR
EEPR.
LED.
I
2
C error occurred while reading the EEPROM on one of the LED drivers.
I2C-
ERROR
RE-
SYNC.
I 2 C error occurred while reading info on the re-sync unit.
I2C-
ERROR
SENSE
CTRL.
I 2 C error occurred while reading info on the temperature sensors of the controller unit.
I2C-
ERROR
SENSE
DRIVE
I 2 C error occurred while reading info on the temperature sensors of the LED drivers.
HPOS
144
→
216
Displaying the start pixel row and end pixel row of the tile in the complete LED-wall. The origin is
always left top of the display.
LED-
BOARD
MIS-
MATCH
Gives warning that LED-modules has different serial numbers than the ILite tile.
→
LINK
Displaying the direction of “LINK” signal (sync) and “DATA” signal (video content). The arrow can
point to the left or to the right.
→
LINK
DUAL
Displaying the direction of “LINK” signal (sync) and “DATA” signal (video content). The arrow can
point to the left or to the right. Dual path detected.
→
LINK
NO
DATA
Displaying the direction of “LINK” signal (sync). The arrow can point to the left or to the right.
No data detected.
→
LINK
ERROR
DATA
←
&
→
Displaying the direction of “LINK” signal (sync). The arrow can point to the left or to the right.
Data detected from left and from right.
Meas.
Nr.
17
Displaying detected measurement system.
R5976865 ILITE 6/8/10/12 DISPLAY 14/12/2007 61