![background image](http://html1.mh-extra.com/html/barco/id-lr-6-r9010342/id-lr-6-r9010342_user-manual_4181077078.webp)
6. Advanced
Image 6-58
The AGC can be disturbing in case of Macrovision encoded signals, therefore the AGC can be disabled (OFF)
at any time
6.4.12 Manual Gain Control
What can be done ?
Beside the AGC there is the possibility to manually set the gain of the incoming video signal. When the AGC is enabled (ON), the
manual setting does not affect the gain, AGC must therefore be disabled. The manual gain control must be done on an external
pattern with white areas (grey scale bar pattern)
How to set the Manual Gain Control ?
1. Press
MENU
to activate the Tool bar
2. Press
→
to select the
Image
item
3. Press
↓
to Pull down the
Image
menu
4. Use
↑
or
↓
to select
Manual Gain Control
Image 6-59
5. Press
ENTER
74
R59770134 ID LR-6 27/05/2011
Summary of Contents for iD LR-6 R9010342
