![background image](http://html1.mh-extra.com/html/barco/id-h250/id-h250_service-manual_3858134077.webp)
6. Optical spares and servicing procedures
Image 6-14
6.5.2
Removing the folding mirror
Necessary tools
Torx screwdriver T10
How to remove the folding mirror?
1. Remove the top cover of the projector
2. Remove the PMP
3. Remove the three screws fixing the folding mirror
Image 6-15
Fixing screws of the folding mirror
Image 6-16
Lift the folding mirror to remove it
4. Gently lift the folding mirror to remove it
Note:
Do not touch the mirror part!
6.5.3
Adjusting the folding mirror
Necessary tools
Allen key 2 mm
Misalignment of the folding mirror
A black border or a black area in a corner of the projected image can be caused by a misalignment of the folding mirror. This black
area can be found at any side of the image, depending on the position of the folding mirror.
R59770097 ID H250 / H500 15/05/2007
73
Summary of Contents for iD H250
