![background image](http://html1.mh-extra.com/html/barco/icon-h600/icon-h600_installation-manual_3844700028.webp)
4. Installing the RGB/video input on NH-12 and Galaxy NH-12
Image 4-2
Rear cover:
fi
xing screw
2. Lift the back side of the rear cover and pull it backward to remove it
Image 4-3
Tilt the back side of the rear cover
Image 4-4
Pull the rear cover backward
Image 4-5
Rear cover removed
4.3
Removing the top cover
Necessary tools
Phillips screwdriver Ph2
How to remove the top cover?
1. Remove the four
fi
xing screws
-
two at the front side of the projector
-
one at the left side
-
one at the right side
Image 4-6
Top cover: front screws
Image 4-7
Top cover: left screw
24
R5976888 RGB/VIDEO INPUT KIT 30/07/2008
Summary of Contents for iCon H600
