![background image](http://html1.mh-extra.com/html/barco/icon-h250/icon-h250_user-manual_3843352074.webp)
2. Basic commands
2.10 Source selection
Description
Selects an input source.
Command
Command [0]
\x38
Data
strSource: String describing de source to be selected
strSource = C-string representing the source type (RGB, RGB (YUV), PC, YUV (RGB), DVI, Video, S-Video, HDSDI, SDI.
The source types are the names as displayed in the OSD source selection menu i.e. spaces and other char-
acters like “(“ must not be omitted.
For more info about the input configurations, see the projector Owner’s manual.
The acknowledge data contains also an error code and its Unicode description (this is the same error as the
one displayed on the desktop.
Some possible sources strings are :
Sources
String
L1 RGB
\x4c\x31\x20\x52\x47\x42\x00
L2 RGB (YUV)
\x4c\x32\x20\x52\x47\x42\x20\x28\x59\x55\x56\x29\x00
PC
\x50\x43\x00
DVI
\x44\x56\x49\x00
Video
\x4c\x31\x20\x56\x69\x64\x65\x6F\x00
S-Video
\x4c\x31\x20\x53\x2D\x56\x69\x64\x65\x6F\x00
Example
Selects L1 RGB (YUV).
Transmit
Start
\xfe
Projector address
\x01
Command[0]
\x38
Data[0]
\x4c
Data[1]
\x31
Data[2]
\x20
Data[3]
\x52
Data[4]
\x47
Data[5]
\x42
Data[6]
\x20
Data[7]
\x28
Data[8]
\x59
70
R59770077 RS 232 SERIAL COMMUNICATIONS FOR ICON H250/400 16/02/2007
Summary of Contents for iCon H250
Page 1: ...RS 232 Serial Communications for iCon H250 400 User Manual Basic R59770077 00 16 02 2007...
Page 4: ......
Page 100: ...2 Basic commands 96 R59770077 RS 232 SERIAL COMMUNICATIONS FOR ICON H250 400 16 02 2007...
Page 122: ...3 Advanced commands 118 R59770077 RS 232 SERIAL COMMUNICATIONS FOR ICON H250 400 16 02 2007...