Barco iCon H250, Installation Manual

Page: 12 / 15

2. Hard disk recovery procedure
Image 2-15
2.4 iCon H250 / H400 server setup
Set the boot configuration to its original state
1. When the server restarts (on the first
beep
sound), press
F2
to enter the BIOS
2. Navigate to the tab
Boot
3. Use the
+
and the
-
key to move the
IDE 0
to the top of the Boot priority list
4. Navigate to the tab
Exit
5. Select
Exit Saving Changes
: the server will start to reboot
Setup the server again
1. After some minutes, you will be asked to enter the Windows ® XP Product Key: enter this key. You can find it on a label on the
bottom plate of the projector
Image 2-16
2. Now the Windows
®
operation system reboots: you will be asked to enter the password. Enter the text:
Barco
Tip: Check the configuration of your keyboard first (AZERTY or QUERTY)
3. Start the Auto-configuration by selecting
Now
10 R59770070 ICON H250 / ICON H400 31/01/2007